We chose porcelain tile mainly for its durability, plus we found a collection of tile that mimics aged concrete, which we felt would work really well with our Urban Rustic theme for the house.
The Iris US Ecocrete collection allowed us to use two different colors while maintaining a consistent overall look through the house. For example, in the kitchen, entry, and utility room we went with the Sage color; a nice mix of green, gray, and even some spots of very dark green or black. For the master bath we went with the Weathered Black since we were going to have some red accents and we wanted to play with color a little bit.
The Ecocrete tiles are also Greenguard certified, and they have a slightly rough surface texture to help prevent slips or falls.
For tile underlayment, Wonderboard Lite was our base.
For thinset and grout, Mapei products were used, readily available from Floor and Decor.
The shower kit also came with all the drain components.
Colors and Textures
In the photo below, all of our tile selections are laid out in preparation for deciding on grout colors.
The porcelain hexagon tile was used on the floor of our second bathroom, in addition to the floor of each shower. These were the only areas where we didn’t use the Ecocrete tiles.
The blue glass accent tile was used in our second bathroom shower, while the red glass was used in our master bath shower.
The white subway tile was used in both showers for the ceilings and the walls.
Tile almost complete in the kitchen:
Tile started in the master bathroom:
For the two showers we decided to orient the slightly larger than traditional subway tile in a vertical pattern, a subtle repetition of the strong vertical lines of our charred cedar siding.
In the second bathroom shower we used a 4″ x 10″ subway tile, while in the master shower we went even larger using tile that measured 6″ x 17″.
We kept the glass accent tile to a minimum, utilizing it inside each niche and next to the shower head and valve.
Using a frameless fixed panel of glass without a door keeps each shower more open and easier to access. It also means one less thing to have to clean, maintain, or eventually replace.
By covering the curb with a towel before turning on the water, very little water escapes to splash on the nearby baseboard or drywall. A small price to pay, we feel, in order to keep the shower area more open.
In terms of size, the second bathroom shower measures 3′ wide and 5 1/2′ long, while the master shower is slightly larger at 3′ x 5′ 10″. Both spaces are very comfortable to shower in.
We chose to tile the ceiling of each shower since, in our experience at least, drywall doesn’t tend to hold up very well in this area, instead flaking or peeling off over time. By combining the tiled ceilings with their lower height than the room, visually we like how it makes clear that the shower area is its own dedicated space.
We liked the look of the traditional hexagon pattern, plus it feels nice underfoot, both in the showers and on the floor of the second bathroom.
Finished master bath shower with glass panel:
In both showers we used a Speakman shower head and valve. They’re reasonably priced, and they have a good reputation for durability. We had seen them used in hotels on a couple of vacations prior to our build. We were surprised by their quality, especially for a brand we had never previously heard of before.
All of our plumbing fixtures, including these shower heads, are Water Sense certified in order to keep our total water usage to a minimum, while also hopefully reducing our annual water bill.
Although I’ve read complaints from users online about their dissatisfaction with a lower flow shower head — some even going so far as to remove the flow restrictor inside the head in order to increase the flow of water — we couldn’t be happier with our shower heads, faucets, and toilets. So far, at least, we’ve had zero issues with any of these Water Sense certified fixtures.
Master bath niche with red glass accent:
Master bathroom floor in the weathered black tile:
A second view of the black tile as it meets up with the hickory flooring in the master bedroom:
The tile in the entry area as it meets up with the hickory wood flooring:
The hickory meeting up with the kitchen tile:
With all of our flooring complete on the main floor, the only area left to finish up was our basement floor. I’ll discuss the decorative finish we came up with for the concrete slab in the next blog post.